EPSOLAR MPPT solar controller, Tracer-1215RN,10A,12V/24V

1. MPPT 2. 10A,12V/24V 3. Max PV input power 130W for 12V system, 260W for 24V system 4. ON/OFF, Dusk to dawn, 1-15h timer

MPPT solar controller

Max PV input power 130W for 12V system, 260W for 24V system

Introduction:

EPSOLAR Tracer series controller adopts MPPT technology (Maximum Power Point Tracking). The advanced tracking algorithm make the solar module operate at ideal voltage which the solar modules can produce the maximum available power. Compared to conventional PWM controller, MPPT technology increase charge efficiency up to 30% and decrease the power of solar array needed.

Tracer has the ability to step-down the higher voltage solar array to recharge a lower voltage battery bank. Max. 150VDC input. So it allows on grid solar modules or thin film modules to charge the off-grid battery. And the cable size can be reduced because of the small current from the solar array.

Electrical Parameters

Description	Parameter
Nominal System Voltage	12VDC / 24VDC Auto work
Rated Battery Current	10A
Maximum Battery Voltage	32V
Max. Solar Input Voltage	150VDC
Max. PV input power	12V / 130W 24V / 260W
Self-consumption*	<10mA(24V)
Charge Circuit Voltage Drop	≤0.26V
Discharge Circuit Voltage Drop	≤0.15V
Communication	TTL232 / 8pin RJ45

Key features

²  MPPT technology

²  Peak conversion efficiency of  97 %

²  High Tracking efficiency of  99%

²  Several seconds tracking speed

²  Very fast Sweeping of the entire I-V curve

²  4- Stage charge with PWM output

²  Excellent thermal design and nature air cooling

²  Full power output in ambient temperatures up to 45°C

²  Temperature compensation function

²  Sealed, Gel, Flooded battery type optional

²  Diversified load control: Manual, Dusk to Dawn, dual timer, TEST

²  RJ45 interface with optional remote meter

²  Standard 2 years warranty

²  CE certificate

EPSOLAR MPPT solar controller, Tracer-1215RN,10A,12V/24V